Alloy Shell , Easy for installation. Affordable Rates with Top Quality.
No More Wiring Installations and other Complex Accessories. Well compatible with Electronic Locks and DVR Camera.
12VDC Power Supply, Relay Time Editable (1300 seconds). Device reject the call (5#0# mode). Device answer the call (5#1# mode). Administrator or family password(for example administrator password 123456 , family password 888888).
Enter room number to call. Device will call the house owner or families. Answer the call to open. During the talking press 1 or 2 or 3 to control first relay or second rely or both relay to open door.Open the unit's back cover and insert the SIM card. Wiring connect refer to the picture. Then switch on the device, LED displays. When the SIM card working normally, LED screen displays. Enter the admin password (6 digits, default: 123456). Back to the setup interface. After 1 second, continue the settings or press to return when it displays. Enter the preset password PWD# Default 123456#. Enter the new password PWD#. Repeat last operation again to confirm OK. If get message Admin set OK means set up successfully. Then the password will be changed to 000000.
Enter the Room number# E. Administrator send the SMS #Room Nunmber#0#Room Number#0#Room Nunmber#0 to the device. Setting the device calling type. Enter 4#0# or enter 4#1#. After 1 second, continue the settings or press to return when it display.
By SMS command: Administrator send the SMS command #4#0(or #4#1) to the device. If get Admin Set Ok means successful. Setting the device answering type. If successful , will show it. After 1S go back to set mode , if continues to other operation press.
By message: Administrator send the SMS command #5#0(or #5#1) to the device. If get back message Admin Set Ok means successful.
No space and it is CAPITAL. Setting the Relay Working Method (SMS Only).
Administrator send the SMS command #6#1#NO#2#NC to the device. (NO, NC can be changed by user). Remark: 6 means setting the relay, 1 means the relay 1, 2 means the backup relay 2, NO means the relay Normal Open, NC means the relay Normal Close.
Setting the Relay Working Time(Unit: Second). Enter the #6#1#working time# to setting the relay 1 working time, Enter #6#2#working time# to setting the relay 2 working time. When setting 0 means dont work. By SMS command: Administrator send the SMS command #6#1#relay working time#2#relay working time to the device. #6#1#23#2#23 means the relay 1 need to working 23S, relay 2 need to working 23S too.
(The device will send the SMS to the administrator, including the GSM modules IMEI code and the GSM signal), after that. The device will be back to the setting status. Can change the other setting or press to standby state. By SMS Command: The Administrator send the SMS #7 to the device. If successfully, the device will return the IMEI code and the GSM signal.
Administrator send the SMS command #Administrator password CLRALL to the device. Each room has a door access password which can press on keyboard to open the door. Change or add the door operate password. House host send the SMS command Room Number#6#.House host send the SMS command Room Number#2 or #3, #4, #5. Short contact the R and G in J4 by the jumper. After 3 seconds, pull out the jumper and removed it to J6. The device will be reset to the default setting, all the authorized number will be removed. , and plug it back to. Please refer to page 4 picture.
The item "Wireless Intercom Door Access Free Call Remote Control by Phone GSM" is in sale since Saturday, May 4, 2019. This item is in the category "Home & Garden\Home Improvement\Home Security\Door Entry Systems & Intercoms". The seller is "u-telecare_6" and is located in Shenzhen.This item can be shipped worldwide.