The SIM10ID color video doorphone can be used to call, intercom and control both an electronic door lock and an electrically operated outdoor gate, can open 2 gate , parking /car gate and e-lock gate (front door or front gate of the villa). 1, you can open the gates from the inside monitor.You can also open the front gate/ front door with RFID Proximity ID Token Tag Key Blue. Easy and comfortable - you do not need key anymore to open the front gate!!! You just need to bring the "blue RFID Proximity Tag" closer to the outdoor unit and the door will be open!!!!
And it is also can be applied to monitor outside for 24 hours, giving you the combined benefit of security and convenience. It is a product that very suitable for villa, single house, and hotel, office place, etc. Easy and comfortable TO GET in your home. Id unlooking the front gate / door with RFID Proximity ID Token Tag Key Ring Blue- just by approach the blue key near the our door unit. The front door/gate will be open for 1 OR 5 sec (programmed to 5 sec can be change to 1 sec).7 TFT screen with low power consumption, no radiation and high definition. Ultra-thin designed indoor unit with touch pad. Id unlooking the front gate / door with RFID Proximity ID Token Tag Key Ring Blue. Electronic door lock release function.
16 different chimes for option. Adjustable volume of ring and talking, brightness and contrast of indoor unit.Enclosed adapter for power supplier for DIY. The indoor unit can be hung on the wall. Keep the indoor unit away from high temperatures, such as near an oven or direct sunlight, high humidity, such as bathrooms and greenhouses. Do not install the indoor unit close to a television - the signals the TV and the Intercom use to function can be interfere with one another. Do not touch the unit with wet hands. Clean the camera or screen with a soft cloth. Do not use liquids or solvents of any kind. Prevent both outside and inside unit from shock. Do not expose the camera of the outdoor unit to direct sunlight - this will Use the product under the circumstance of barrier-free and no inteference. To prevent damage, the adapter should be fasten on the wall according to Instruction. Power plug as disconnecting device should be kept convenient to operate. Fasten the bracket on the wall with screws. Install 4×30 BA screws on the wall. Hang the unit on the bracket after finishing the connection.
Plug the two ends of. The jack of the power adapter into the sockets of AC power and the unit respectively. Take off the screws on the bottom of the outdoor unit and remove protection cover.
Dimension: 108(W) ×167(H) ×65(D) mm. Fix the foam on the back of the flush-mounted panel and mount the panel on the. Install the outdoor unit 4.6ft/1.4m-5.6ft/1.7m from the ground according to.
Camera view so as to avoid direct sunshine. Put square nut (M3) into the groove under the rain shade. Rain shade with hexagonal screws (M3×10) from the bottom of the rain shade. And tighten up with wrench.
Take off the screws on the bottom of the outdoor unit and remove the protection cover. Fix outdoor unit and rain shade on the wall with 4×30BA screws. Camera effect so as to avoid direct light. Into rain shade with hexagonal screws (M3×10) from the bottom of the rain.
Shade and tighten up with wrench. ·Attach wires to terminals 1-6 on the rear of the indoor unit by sliding the U-shaped connection under the screw terminals.
·Screw into place, being careful not to overtighten. ·Attach a control for an electric lock to terminal 7&8 on the rear of the indoor unit and controls for outdoor gate lock to terminal J6.
·Attach the bare wire ends into the connection to connections 1-6 on the outdoor unit using a small screwdriver to push in the small button atop each wire terminal, and insert the wire. The distance between the indoor unit and the outdoor unit can change by chnaging the cable Configuration. ·To distance between 50ft/15m tto 164ft/50m, adopt RVV6×0.5mm2 connecting wire. Adopt RVV6×0.75mm2 connecting wire.For lengthen more then 328ft/100m contact as i we will calculate the you need to use for better video and audio signal. Wire is for connecting terminal 1-6 from indoor unit to outdoor unit. ·To use the electronic-lock wire, adopt RVV28×1.0 mm2.
Touch CALL button of outdoor unit to call. The doorbell will ring and.
The images of visitors will show on the indoor unit. Press TALK again to disconnect. Talking time last for about 120 seconds.
Touch UNLOCK button to release the electronic door lock. Touch GATE UNLOCK button to release the outdoor gate. Touch MONITOR button once to turn on and again to turn off. The monitor will turn off automatically after about 40 seconds. Same time, you can touch TALK button to use the intercom.
Press MELODY SELECTION button to cycle through the. Different tones available for the doorbell in the monitor mode. Use VOLUME to adjust the loudness of the in-built speaker of.Use BRIGHTNESS and CONTRAST to adjust how light. The image appears and how much color is in the image respectively. To release the door by pressing the UNLOCK button or using the ID card. Seven cards available: two administration cards (add card & delete card) and five user cards. Steps of adding user card.
Present the enclosed Add Card to the ID card reading area. Swipe User Cards you need add to the card reading area. Present the Add Card again.
Steps of deleting user card. Present the enclosed Delete User Card to the ID card reading area. Swipe User Cards you need delete to the card reading area.
Present the Delete Card again. Working Distance of Infrared Light. The item "Video door phone intercom 7 LCD Surface Mounting camera & night vision RFIDkey" is in sale since Sunday, November 4, 2012.
This item is in the category "Home & Garden\Home Improvement\Home Security\Door Entry Systems & Intercoms". The seller is "shimi_mesh" and is located in israel. This item can be shipped worldwide.